Carry (FGI/FGR) – Cilindrisch
Eichenberger FGI/FGR kogelomloop spindel
- Excellente service
- Klantspecifieke assemblage
- Voorraadhoudend
- Leveringsgraad 99,5%
Principe
Eichenberger spindel met kleine spoed. Sinds 1953 staat de naam Eichenberger voor hoge kwaliteit in het rolvervormen van spindels. Vanuit de productievestiging in Zwitserland wordt wereldwijd geleverd.
De uitvoering Carry (FGI/FGR) – Cilindrisch heeft de volgende voordelen:
Bouwvorm
No data was found
Maatvoeringen
Maatvoeringen
| Type | Spindel afmetingen (in mm) | Moer afmetingen (in mm) | ||||
|---|---|---|---|---|---|---|
| Diameter | Spoed | Buitenzijde spindel | Buiten diameter | Lengte | Draad | |
| d 1 | D 1 | L n | M | |||
| FGI 5x2-3 | 5 | 2 | 5 | 10 | 18 | M8 x 0,75 |
| FGI 5x3-2 | 5 | 3 | 5 | 10 | 19 | M8 x 0,75 |
| FGR 6x2-1 | 6 | 2 | 5.7 | 16 | 22 | M12 x 1 |
| FGI 8x1-3 | 8 | 1 | 8 | 16 | 22 | M14 x 1 |
| FGI 8x1,5-3 | 8 | 1.5 | 8 | 16 | 22 | M14 x 1 |
| FGI 8x2-3 | 8 | 2 | 8 | 16 | 28 | M14 x 1 |
| FGR 8x2-1 | 8 | 2 | 8 | 18 | 24 | M14 x 1 |
| FGI 8x2,5-3 | 8 | 2.5 | 8 | 16 | 24 | M14 x 1 |
| FGR 8x2,5-1 | 8 | 2.5 | 8 | 17.5 | 24 | M15 x 1 |
| FGI 8x3-3 | 8 | 3 | 8 | 16 | 25 | M14 x 1 |
| FGR 8x5-2 | 8 | 5 | 8 | 18 | 25 | M14 x 1 |
| FGR 8x8-2 | 8 | 8 | 8 | 18 | 25 | M14 x 1 |
| FGI 10x2-2 | 10 | 2 | 9.7 | 18 | 22 | M16 x 1 |
| FGR 10x2-1 | 10 | 2 | 9.7 | 19.5 | 22 | M17 x 1 |
| FGI 10x3-3 | 10 | 3 | 9.9 | 20 | 29 | M18 x 1 |
| FGR 10x3-1 | 10 | 3 | 9.9 | 21 | 29 | M18 x 1 |
| FGI 10x4-4 | 10 | 4 | 10 | 20 | 40 | M18 x 1 |
| FGR 10x10-2 | 10 | 10 | 9.8 | 23 | 35 | M18 x 1 |
| FGI 12x2-2 | 12 | 2 | 12 | 20 | 23 | M18 x 1 |
| FGI 12x4-3 | 12 | 4 | 12 | 24 | 39 | M20 x 1 |
| FGR 12x4-1 | 12 | 4 | 12 | 26 | 32 | M20 x 1 |
| FGI 12x5-3 | 12 | 5 | 12 | 23 | 42 | M20 x 1 |
| FGR 12x5-1 | 12 | 5 | 12 | 26 | 37 | M20 x 1 |
| FGR 12x10-2 | 12 | 10 | 11.9 | 26 | 37 | M20 x 1 |
| FGR 12,7x12,7-2 | 12.7 | 12.7 | 13.1 | 29.5 | 50 | M25 x 1,5 |
| FGR 14x2-2 | 14 | 2 | 14 | 26 | 32 | M22 x 1,5 |
| FGI 14x4-3 | 14 | 4 | 14 | 25 | 34 | M22 x 1,5 |
| FGR 14x4-1 | 14 | 4 | 14 | 29 | 32 | M22 x 1,5 |
| FGR 16x2-1 | 16 | 2 | 16 | 30 | 28 | M26 x 1,5 |
| FGI 16x5-3 | 16 | 5 | 15.7 | 30.2 | 45 | M26 x 1,5 |
| FGR 16x5-1 | 16 | 5 | 15.7 | 32 | 42 | M26 x 1,5 |
| FGR 16x10-1 | 16 | 10 | 15.7 | 32 | 47 | M26 x 1,5 |
| FGR 16x10-2 | 16 | 10 | 15.7 | 32 | 47 | M26 x 1,5 |
| FGR 16x16-3 | 16 | 16 | 15.9 | 32 | 47 | M26 x 1,5 |
| FGR 20x2-2 | 20 | 2 | 20 | 36 | 30 | M30 x 1,5 |
| FGI 20x5-3 | 20 | 5 | 19.2 | 33 | 47 | M30 x 1,5 |
| FGR 20x5-1 | 20 | 5 | 19.2 | 36 | 42 | M30 x 1,5 |
| FGR 20x10-2 | 20 | 10 | 19.5 | 38 | 58 | M35 x 1,5 |
| FGR 20x20-2 | 20 | 20 | 20 | 38 | 58 | M35 x 1,5 |
| FGR 20x20-4 | 20 | 20 | 20 | 38 | 58 | M35 x 1,5 |
| FGI 25x5-3 | 25 | 5 | 24.6 | 40 | 57 | M38 x 1,5 |
| FGR 25x5-2 | 25 | 5 | 24.6 | 44 | 58 | M40 x 1,5 |
| FGR 25x10-2 | 25 | 10 | 24.8 | 43 | 58 | M40 x 1,5 |
| FGR 25x25-2 | 25 | 25 | 24.5 | 44 | 72 | M40 x 1,5 |
| FGR 25x25-4 | 25 | 25 | 24.5 | 44 | 72 | M40 x 1,5 |
| FGI 32x5-4 | 32 | 5 | 31.6 | 52 | 55 | M48 x 1,5 |
| FGR 32x10-2 | 32 | 10 | 31.6 | 52 | 62 | M48 x 1,5 |
Belastingen en momenten
Belastingen
| Type | Draaggetallen (kN) | |
|---|---|---|
| Dynamisch | Statisch | |
| FGI 5x2-3 | 0.5 | 0.8 |
| FGI 5x3-2 | 0.34 | 0.49 |
| FGR 6x2-1 | 1.7 | 2.3 |
| FGI 8x1-3 | 0.7 | 1.2 |
| FGI 8x1,5-3 | 0.8 | 1.3 |
| FGI 8x2-3 | 1.4 | 2 |
| FGR 8x2-1 | 2 | 3.2 |
| FGI 8x2,5-3 | 1.4 | 2.1 |
| FGR 8x2,5-1 | 2 | 3.2 |
| FGI 8x3-3 | 1.4 | 2.1 |
| FGR 8x5-2 | 1.96 | 3.47 |
| FGR 8x8-2 | 1.5 | 2.5 |
| FGI 10x2-2 | 1.25 | 2.1 |
| FGR 10x2-1 | 2.3 | 4 |
| FGI 10x3-3 | 2.4 | 4.2 |
| FGR 10x3-1 | 2.8 | 5 |
| FGI 10x4-4 | 4.1 | 6.7 |
| FGR 10x10-2 | 2.5 | 4.5 |
| FGI 12x2-2 | 1.38 | 2.5 |
| FGI 12x4-3 | 4 | 6.8 |
| FGR 12x4-1 | 5.5 | 11 |
| FGI 12x5-3 | 5 | 8.6 |
| FGR 12x5-1 | 6.6 | 12 |
| FGR 12x10-2 | 4.4 | 7.7 |
| FGR 12,7x12,7-2 | 8 | 15.5 |
| FGR 14x2-2 | 4.5 | 10 |
| FGI 14x4-3 | 5 | 8.8 |
| FGR 14x4-1 | 8.1 | 16 |
| FGR 16x2-1 | 2.5 | 5.5 |
| FGI 16x5-3 | 9.7 | 22 |
| FGR 16x5-1 | 12 | 25 |
| FGR 16x10-1 | 8.5 | 12.5 |
| FGR 16x10-2 | 17 | 25 |
| FGR 16x16-3 | 9.15 | 18.75 |
| FGR 20x2-2 | 4.6 | 15 |
| FGI 20x5-3 | 10.8 | 25 |
| FGR 20x5-1 | 13.7 | 29.9 |
| FGR 20x10-2 | 21 | 51 |
| FGR 20x20-2 | 10 | 22 |
| FGR 20x20-4 | 14.6 | 35 |
| FGI 25x5-3 | 11.7 | 30 |
| FGR 25x5-2 | 17.5 | 42.4 |
| FGR 25x10-2 | 21 | 54 |
| FGR 25x25-2 | 10 | 24 |
| FGR 25x25-4 | 20 | 48 |
| FGI 32x5-4 | 19 | 54 |
| FGR 32x10-2 | 20 | 55 |
3D model
3D model
Download het 3D model
Advies nodig?
Neem contact op!
Graag adviseren wij u persoonlijk over de optimale oplossing voor uw toepassing. Wanneer u uw naam en telefoonnummer invult dan zal één van onze Product Managers zo snel mogelijk contact met u opnemen.
