Rollon Easyslide

Rollon Easyslide is a compact linear ball-bearing guide designed for machine construction, where load capacity, rigidity, and limited installation space are key selection criteria. The system consists of a cold-drawn steel C-profile with induction-hardened raceways and integrated carriages. This design enables linear motion without requiring significant additional installation space.

The hardened raceways enhance the guide’s load capacity and wear resistance. Furthermore, the ball-bearing system ensures smooth linear motion with low frictional resistance. The most suitable version depends on the load, the required stroke, and the motion profile.

Which versions of Easyslide are available?

Within this product family, Rollon offers two versions. The standard Easyslide utilizes a ball cage; in this design, the balls move within a restricted path, meaning the available stroke depends on the chosen rail length and configuration.

In contrast, the Easyslide SNK employs a recirculating ball system. The balls circulate through the carriage, allowing for different possibilities regarding the required stroke and movement. Both versions combine a compact design with a high load-bearing capacity, depending on the selected size and application.

What should you look for when selecting Easyslide?

When selecting a Rollon Easyslide system, the load, stroke length, and available installation space serve as the starting point. The position of the center of gravity of the mass is also important; an off-center load will exert moments on the carriage, so these must be taken into account during the dimensioning process.

Furthermore, speed, acceleration, and cycle time influence the dynamic load. Additional forces can arise, particularly during frequent changes in direction. Therefore, the chosen motion profile must be compatible with the capabilities of the linear guide.

The mounting structure also plays an important role. Sufficiently rigid support and correct alignment help to limit unwanted deformation and additional resistance. Therefore, evaluate not only the load-bearing capacity but also the rigidity and stability of the entire structure.

Finally, environmental conditions, lubrication, and maintenance deserve attention. Contamination can affect motion behavior and cause wear. The necessary measures depend on the operating conditions and the specific configuration chosen.

Selecting an appropriate Easyslide configuration therefore requires balancing load capacity, moments, stroke length, dynamics, and mounting requirements. This allows us to determine which version aligns with the machine’s mechanical and functional specifications.

Are you unsure which Rollon Easyslide version is right for your application? Our engineers can assist with selection and technical calculations. Take a look at our Engineer Support.

Also check out the official product information for Rollon Easyslide for available versions and technical documentation.