Ball screw bearing blocks
- Excellente service
- Klantspecifieke assemblage
- Voorraadhoudend
- Leveringsgraad 99,5%
Principle
Our bearing blocks are designed for ball screws with finished shaft ends.
The bearing blocks are compactly designed to utilize the space at the installation site. Since the bearing is provided with an adjusted preload, the bearing block can be assembled with a ball screw without further processing. As a result, the required man-hours during assembly are reduced and the assembly accuracy can be increased.
The executionBall screw bearing blockshas the following advantages:
Construction forms
Fixed bearing (BK)
Floating bearing (BF)
Fixed bearing (FK)
Floating bearing (FF)
Dimensions
Block design fixed bearing
| Type | Spindel diameter | Afmetingen (in mm) | ||
|---|---|---|---|---|
| L | B | H | ||
| BK10_C5 | 14 / 15 | 25 | 60 | 39 |
| BK12_C5 | 16 / 18 | 25 | 60 | 43 |
| BK15_C5 | 20 | 27 | 70 | 48 |
| BK17_C5 | 25 | 35 | 86 | 64 |
| BK20_C5 | 28 / 30 / 32 | 35 | 88 | 60 |
| BK25_C5 | 36 | 42 | 106 | 80 |
| BK30_C5 | 40 | 45 | 128 | 89 |
| BK35_C5 | 45 | 50 | 140 | 96 |
| BK40_C5 | 50 / 55 | 60 | 160 | 110 |
Block design floating bearing
| Type | Spindel diameter | Afmetingen (in mm) | ||
|---|---|---|---|---|
| L | B | H | ||
| BF10_C3 | 14 / 15 | 20 | 60 | 39 |
| BF12_C3 | 16 / 18 | 20 | 60 | 43 |
| BF15_C3 | 20 / 25 | 20 | 70 | 48 |
| BF17_C3 | 25 | 23 | 86 | 64 |
| BF20_C3 | 28 / 30 / 32 | 26 | 88 | 60 |
| BF25_C3 | 36 | 30 | 106 | 80 |
| BF30_C3 | 40 | 32 | 128 | 89 |
| BF35_C3 | 45 | 32 | 140 | 96 |
| BF40_C3 | 50 / 55 | 37 | 160 | 110 |
Flange design fixed bearing
| Type | Spindel diameter | Afmetingen (in mm) | |||
|---|---|---|---|---|---|
| L | D (g6) | A | B | ||
| FK10_C5 | 14 / 15 | 27 | 34 | 52 | 42 |
| FK12_C5 | 16 / 18 | 27 | 36 | 54 | 44 |
| FK15_C5 | 20 / 25 | 32 | 40 | 63 | 52 |
| FK17_C5 | 25 | 45 | 50 | 77 | 61 |
| FK20_C5 | 28 / 30 / 32 | 52 | 57 | 85 | 68 |
| FK25_C5 | 36 | 57 | 63 | 98 | 79 |
| FK30_C5 | 40 | 62 | 75 | 117 | 93 |
Flange design floating bearing
| Type | Spindel diameter | Afmetingen (in mm) | |||
|---|---|---|---|---|---|
| L | D (g6) | A | B | ||
| FF10_C3 | 14 / 15 | 12 | 28 | 43 | 35 |
| FF12_C3 | 16 / 18 | 15 | 34 | 52 | 42 |
| FF15_C3 | 20 /. 25 | 17 | 40 | 63 | 52 |
| FF17_C3 | 25 | 20 | 50 | 77 | 61 |
| FF20_C3 | 28 / 30 / 32 | 20 | 57 | 85 | 68 |
| FF25_C3 | 36 | 24 | 63 | 98 | 79 |
| FF30_C3 | 40 | 27 | 75 | 117 | 93 |
Loads and moments
Geen gegevens ingevoerd
3D Configurator
Need advice?
Contact us!
We would be happy to advise you personally on the optimal solution for your application. If you fill in your name and telephone number, one of our Product Managers will contact you as soon as possible.
