Compact (omega toothed belt)-AXC

Principle
The AXC modules from NTN-SNR are compact modules with integrated guidance and drive. These modules are multifunctionally applicable, from a single module to a complete XYZ system.

Profile
The AXC Omega program consists of 4 profile sizes. The profiles are designed in such a way that a very high rigidity is achieved in combination with a compact build.
The available options are: 40×40, 60×60, 80×80, and 120×120.

Drive
The belt in Omega modules is clamped on both sides of the profile and is passed through the table part with a drive pulley. The module is then driven on the table part, making these modules particularly suitable for compact Z-strokes and extremely long stroke lengths.
The AT belts used are reinforced with steel cords, which makes them suitable for high power transmission. By pre-tensioning these belts on the module, high accuracy is achieved without the risk of belt skipping. The belts have a parabolic tooth profile, which reduces noise.

Guidance
For each AXC module, you can choose whether to use guide rollers or rail guidance with ball chain. Guide rollers are primarily used for high speeds and low loads. Rail guides are highly suitable for demanding and highly dynamic applications. Additionally, a low-noise movement is achieved, and the product is maintenance-friendly. The re-lubrication interval of the ball chain guides is approximately 5000 km (depending on environmental conditions).

Options
In addition to the standard modules, a wide range of additional options is available. We offer a broad selection of mounting options, reducers, as well as coupling shafts and sensors, for example.